Company news about Analog signal corresponding controller KSC5000

It is a general-purpose analog signal controller that pursues ease of use.
Difficult adjustment of high-speed corners and overlap of start and end points can be accomplished beautifully with simple voltage control. (Multi-segment control and continuous change control can be used freely.)
Can be used with eccentric screw valve.
Supports analog signal output for various robots or collaborative robots.
Automatic suction response can prevent glue hanging.

Analog signal input voltage: ±10V
The relationship between speed percentage and analog voltage is as shown in the figure above
Actual glue dispensing speed = set speed × speed percentage
Example: In actual work, the fastest glue dispensing speed required is 18cc/min, then set the set speed to 20cc/min. At this time, if you want to use 18cc/min, adjust the input analog voltage to 9V. If you want to use 10cc/min, adjust the input analog voltage to 5V